What is difference Deco XE75 vs XE75 Pro? The firmware, network configurations, Wi-Fi settings, and functionality are same between the two. For continuing monitoring and setup, you need to use the Deco mobile app. As far as I can see, there aren’t much differences between these two models other than the fact that the XE75 PRO has one 2.5 gigabit Ethernet port out of three, while the XE75 has three gigabit ports. Check the pricing of both versions if your Internet speed is gigabit or less and they are both accessible in your area. You might be able to save some money on the Deco XE75 compared to the XE75 Pro.
Pros & Cons
Deco XE 75
Pros
- Terrific value for a mesh router with support for Wi-Fi 6E
- Fast, consistent download speeds
- Auto-pairing Deco devices make for simple setup
Cons
- Relatively weak upload speeds
- No multi-gig internet support
- Most homes won’t see much benefit from 6E connections over the 6GHz band
Deco XE75 Pro
Pros
- Easy installation
- Wi-Fi 6E support
- HomeShield parental control and security software included
Cons
- Pricey
- No USB ports
- Some HomeShield features require a subscription
Deco XE75 vs XE75 Pro Specs comparison
Deco XE 75
- Wi-Fi specification: AXE 5400(802.11ax, 5.4 Gbps throughput)
- Number of antennas/removable: 4/No
- Router ports: 3
- Satellite ports: 3; can be used to connect satellite to router with cabling
- Processor: Quad-core 1.7GHz
- Wi-Fi chip: Broadcom
- Peak 802.11ax performance: 1.220Gbps (at 15 feet)
- Maximum range: 100 feet
- Size: 6.8 x 4.1x 4.1 inches
- Estimated annual electricity cost: $ 18.40 (for router and satellite)
Deco XE 75 pro
- Wireless Specification802.11ax with 6E
- Number of Bands 3
- Wi-Fi Speed (Total Rated Throughput) AXE5400
- Number of Antennas
- Number of Wired LAN Ports (Excluding WAN Port)3 on each node
- MU-MIMOQuality of Service (QoS)SecurityWPA3, WPA2, WPA
- Parental Controls
- IPv6 Compatible
- Coverage Area for Hardware as Tested5500 sq ft
- Number of Nodes2
- Wired Backhaul
- Anti-Malware Tools
- Number of USB ports
- Separate Bands
Price – Deco XE75 vs XE75 Pro
There are two-pack and three-pack options for each kits. At $299.99, the XE75 two-pack is the most economical, while the XE75 Pro costs $399.99 when purchased in the same two-pack configuration.
Compared to competing Wi-Fi 6E systems, such as the Linksys Velop Atlas Max ($900 for two), the Netgear Orbi AXE11000 ($1,300 for a three-pack), and the Eero Pro 6E ($500 for two), that is hundreds less.
Compare Deco XE75 vs XE75 Pro
| TP-Link Deco XE75 Pro | TP-Link Deco XE75 | |
|---|---|---|
| Mesh Availability (at launch) | Single router, 2-pack | 2-pack, 3-pack |
| Pre-Synced Hardware | Yes | |
| Possible Dedicated Backhaul Band (default) | None (6GHz as default) | |
| Wired Backhaul | Yes | |
| Dimensions (WxDxH) | 4.1 × 4.1 × 6.7 in (105 × 105 × 169 mm) | |
| Weight | 1.43 lbs (650 gram) | |
| Wi-Fi Designation | Tri-band AXE5400 | |
| 1st Band (2.4GHz) | 2 x 2 AX Up to 574Mbps (20/40MHz) | |
| 2nd Band (5GHz) | 2 x2 AX Up to 2402 Mbps (20/40/80/160MHz) | |
| 3rd Band (6GHz) | 2×2 AXE Up to 2402 Mbps (20/40/80/160MHz) | |
| Backward Compatibility | 802.11ac/n/g/a/b | |
| Guest Network | Yes (One for each band) | |
| Mobile App | Deco | |
| Web User Interface | Simple (No local management) | |
| AP Mode | Yes (as a router or a mesh) | |
| USB Port | None | |
| Gigabit Port | 2x Auto-Sensing | 3x Auto-Sensing |
| Multi-Gig Port | 1x 2.5Gbps Auto-Sensing | None |
| Link Aggregation | No | |
| Dual-WAN | No | |
| Processing Power | 1.7 GHz Quad-Core CPU | |
| Firmware Version (at review) | Not yet tested | 1.1.2 Build 20220224 Rel. 41924 |
| Release Date | August 2022 | April 2022 |
| Power Specs | Input: 100-240V (50/60Hz 0.8A) Output: 12V, 2.0A | |
| Real-Word Power Consumption (router unit, per 24 hours) | Not yet tested | ≈ 156 Wh (as tested) |
Similarities in Deco XE75 vs XE75 Pro
Transfer rate
In this task, the XE75 and Pro versions’ 2.4GHz performance was extremely similar. Peak data rates from the XE75 and Pro were 126 Mbps and 129 Mbps, respectively. In contrast, the Pro achieved 921 Mbps at 5GHz and the XE75 achieved 892 Mbps.
Both units tested well, with the Pro doing a little bit better thanks to its 2.5Gbe connection to our test system. Other than that, though, we saw no discernible differences in daily usage across the two systems.
Band
The main distinction between the two WiFI 6e platforms is that the XE75 Pro has 2.5Gbe whereas the XE75 has three gigabit ports. Other than that, the hardware inside both devices is rather identical. Both devices are capable of 2.4Gbps on the 5GHz and 6GHz frequencies and 574Mbps on the 2.4GHz frequency.
Design
The Deco XE75 bears a striking resemblance to earlier generation TP-Link systems, such as the Deco W7200, with its cylindrical, white construction and black top. All of the devices have the new “6E” logo stamped on the front and a few unique ripples on the top. A tiny LED indicator at the bottom of the node is solid yellow when it is first powered on, flashes blue when it is prepared for setup, is solid green when it is connected and operational, and turns solid red when there is a problem.
Processor
The Deco XE75, like the Asus ZenWiFi ET8, is powered by a Broadcom Wi-Fi chip and features a 1.7GHz four core processor. It can establish three networks using the 2.4-, 5-, and 6GHz bands. It does not, however, have the second 5GHz LAN of the Orbi RBKE963 to transfer data from the satellites to the host router.
Room coverage
Although all of the mesh routers I tested at the Smart Home were able to provide download performance that good, that is still a good result in a 5,800 square foot home.
Connected device
As many as 200 devices can be supported by its 2×2 MUMIMO system. It is not as capable as the RBKE963’s 16 streams of data, even if it can move six separate streams of data simultaneously.
All things considered, it can transfer data at 574 Mbps over its 2.4GHz frequency and 2.402 Mbps over the 5 and 6GHz bands. This results in a maximum theoretical throughput of 5.378Gbps. It is rated at AXE5400.
Deco Setup
The Deco app, which is available for iOS and Android, has the standard assortment of TP-Link capabilities. Additionally, the app does a great job of guiding you through the relatively straightforward setup procedure. You can use any of the two Deco devices as your primary router because they are interchangeable and equivalent to one another: Connect it to your modem by plugging it in, then link it with it through the app. Better more, as soon as you place the second Deco gadget and plug it in, it will instantly connect to the mesh.
After setup is finished, you will see the dashboard with the linked client list that is visible above. Your Wi-Fi SSID, password, and switches for each band are displayed in the initial setup. The backhaul between nodes is normally in the 6GHz range, however it can be adjusted if your 5GHz band is crowded and you require greater speed for a compatible device.
You can select the beginning point for your LAN IP address and view IPv4 and IPv6 settings in the advanced menu. Its menu allows you to configure VLAN or MAC clone in addition to turning on or off the DHCP server.
You can also enable UPNP for automatic configuration and forward ports to devices further down. If necessary, TP-Link also offers a DDNS service. Additional configuration choices are located at the bottom of the advanced menu. These consist of beamforming and quick roaming between nodes. It is also possible to modify the mode and turn off the LED. Your network can be secured using Homeshield, a router-based solution that offers device-specific parental controls.
HomeShield
To access parental controls, such as applying web filters, restricting websites, and establishing bedtime access limits, click the HomeShield button. A simple network scan that looks for firmware updates, password strength, and performance problems can also be done here. All of TP-Link’s network security capabilities and more comprehensive parental controls require a HomeShield Pro service subscription.
HomeShield Pro provides time awards, traffic data, and parental control time limitations for $5.99 per month or $54.99 per year. Malicious content filtering, port intrusion prevention, safety statistics, internet usage records, and security alerts are examples of network security advancements.
