Meshforce M7 vs Orbi difference – do they support WiFi 6?

Meshforce M7 vs Orbi difference
As a Resource Person, share with your network

Meshforce M7 vs Orbi difference – do they offer WiFi 6 firewall? Advanced security protocol and built-in firewall, efficiently keep your personal information in private. Control your home WiFi from the palm of your hand with the app, easily check WiFi status while working and traveling.

Pros & Cons – Meshforce M7 vs Orbi

Meshforce M7

PROS

  • Tri-band connectivity.
  • QoS protocols distribute bandwidth.
  • Top-notch security protocols.
  • Up to 6,000 square footage in coverage.
  • Connects to up to 75 devices.

CONS

  • Device profile is squat.
  • Few on-unit indicators.

Orbi

Pros

  • Advanced cyber threat protection
  • Tri-band AC2200
  • Works with Amazon Alexa and Google Assistant:

Cons

  • Subscription required
  • No USB option

Compare Meshforce M7 vs Orbi RBK23

Tri-band mesh wifiMeshforce M7  (3-pack)Orbi Rbk23
Wifi technologySimultaneous tri-band ac2100 wave 2 with 2×2 MU-MIMOSimultaneous tri-band AC2200 wave 1
Wifi speeds867Mbps @5GHz band 1 867Mbps @5GHz band 2 300Mbps @2.4GHz866Mbps @5GHz band 1 866Mbps @5GHz band 2 (dedicated backhaul) 400Mbps @2.4 GHz band 1
Backhaul linkDedicated backhaul @5GHz 867Mbps and optional wired EthernetDedicated backhaul link @5GHz
Antennas4x internal antennasFour (4) high performance internal antennas with high-powered amplifiers
Ethernet ports1x Gigabit WAN port 2x Gigabit LAN ports2x 10/100/1000Mbps Gigabit Ethernet ports One (1) WAN & one (1) LAN
USB portN/AN/A
Range Coverage6,000 sq ft /3-unit6,000 sq ft /3-pack
ProcessorDual core 900Mhz CPU with 256MB RAM DDR3Processor unknown 256MB flash and 512MB RAM
Other featuresWorks with AlexaWorks with Amazon Alexa and Google Assistant:
Security ProtectionParental controlAdvanced cyber threat protection Netgear armor powered by bitdefender (need subscription)
Price (Mar 2021 in Amazon)$259.00 /3-pack$299.99 /3-pack

Meshforce M7 vs Orbi reviews

Design

Meshforce M7

Each unit is circular and measures about 4-5 inches tall. The circular design is small. Each unit has a sleek, functional design that is white, with a studded base on the bottom. The units are small and discreet, so they can be placed wherever you want and not take up too much space. The white satin finish is easy to clean and will mesh well with the other tech in your room.

Orbi

The router is sharp, angular and covered with antennas. The smooth rounded surfaces of the device have a very decorative look to them, almost like a piece of pottery.

Ports

Meshforce M7

Each router unit has 3 ethernet ports on the back and a DC power input. Two of the ethernet inputs are for LAN and the other is for WAN/LAN connections. Each unit just needs to be plugged in but only one needs to be connected to the modem. The other two can be placed wherever in your house as long as they have a power supply nearby. The individual units each have a Dual Core 900Mhz CPU so they are fast and efficient. On the bottom of the units is a reset button which can be used to reset the system if the connection gets hung up.

Orbi

Orbi has three gigabit Ethernet ports as well as a USB 2.0. There are still many devices on the market that do not have wireless networking. IPTV receivers are particularly guilty. With Orbi, you can simply plug one of these devices directly into it to create a wireless bridge. 

LED lights

Meshforce M7

Each router node has an LED light on the top that lights up to let you know that it’s connected and communicating with the other nodes in the network. 

Orbi

The top of the extender is illuminated by LED lighting. As you walk around your house, the color will change depending on the quality of its connection with the router. A blue ring around the top of the extender lets you know that the connection speed is ideal, while an amber light means that the speed is inhibited. Pink tells you that the extender is too far away from the router. 

Meshforce M7 vs Orbi Coverage

Meshforce M7

The Meshforce M7 Tri-Band is a three-node mesh WiFi system. It’s designed to expand Wifi dead zones up to a range of 2000 square feet. The system itself comes with three nodes but can be fitted with up to 6 nodes to extend signal reach to over 6,000 square feet.

Orbi

The entire setup procedure should only take a couple of minutes. Since the system provides over 2000 square feet of coverage, the majority of customers should be able to simply plop the extender down in the center of their house.  A second extender can be purchased, bringing the total to 4000 square feet of coverage.

Bandwidth

Meshforce M7

The Meshforce M7 is capable of running dual-band channels, so 5GHz and 2.4GHz. For those who do not know, 5GHz channels are more powerful and provide stronger bandwidth, but they have lower range and are impeded by walls more. 2.4GHz channels, in contrast, have lower bandwidth connection but a longer range.

Orbi

The router and the extender have their own dedicated communication channel. The extender is able to access a part of the 5Ghz band not normally used by consumer electronics, and leverages this in order to receive a clear signal back to your primary router. This means that even if you place the extender in a part of your house with no Wi-Fi signal, it should still be able to communicate with the router. 

Setup

Meshforce M7

Setup is one of the best features about the Meshforce M7. All you have to do is pick which router you want to be your “main” node and plug it into the modem with an ethernet cable. Then, plug in the other routers wherever you want to place then and then you set up the network with the smartphone app. 

Orbi

Netgear clearly put some time into designing the set-up procedure for Orbi. First, the user simply connects the router into their existing network with a standard WAN port. Then, the top of the extender is illuminated by LED lighting.

App

The app is very intuitive to use and you can set up the network with just a few selections and button presses. One important note though is that you need iOS 9.0 or later of Android 4.4 to download the app and use it to set up the network. The app has a simple interface and displays the status of each connected node in the center of the screen, with upload and download speeds on the top-left and top-right parts of the screen, respectively. Using the app, you can manage connections for up to 75 devices simultaneously.

Trasnfer rate

The two 5G channels can have a rate of 867Mbps, which is fairly high. Keep in mind that your internet plan needs to have the bandwidth to make use of these rates. Fortunately, most modern internet plans allow for up to a gig of upload speeds. The 2,4Ghz channel has a rate of 300Mbps, which is not a lot but decent for a 2.4Ghz channel. 

Alternate of – Meshforce M7 vs Orbi

Asus ZenWiFi AX

Some people just want to set up their router and forget about it. Other, more tech-savvy folks may like to tweak and tinker with settings to optimize every bit of their network. Asus has always offered a host of options for more advanced users, and their latest ZenWiFi AX system merges Asus’ powerful feature set with wide mesh coverage. The Wi-Fi 6 (or AX) version is a bit more expensive per-unit than Eero, but may be worth it if you want to up the ante.

Eero Pro 6

Eero was one of the first names in consumer mesh Wi-Fi, and they still offer some of the more robust, easy-to-use systems on the market. Now owned by Amazon, the latest Eero Pro 6 system isn’t their most. Affordable but it is their best thanks to tri-band radios and Wi-Fi 6. For three units, the price is fairly competitive, too, and should cover even larger homes nicely. There’s also an older, Wi-Fi 5 version if you want to save a bit of money.

Editor’s recommendations