Is Roborock S7 MaxV Ultra bagless worth buying? The S7 can plan a route around obstructions and truly view your home in 3D thanks to the magic of LiDAR. The S7 MaxV Ultra cleans and vacuums your home in a single pass before returning home to charge, empty the bag of garbage, drain the used liquid into a reservoir, replenish it with clean water, and even wash its own mop head. LiDAR, an RGB camera, and a structured light sensor are used to enable expert navigation of obstacle-filled floors. For automatic daily upkeep and charging, it includes an Empty Wash Fill dock. What is the Roborock S7 MaxV Ultra bagless price?
Best Seller in US
Best Seller in UK
Roborock S7 MaxV Ultra bagless Pros & Cons
- A refillable, self-cleaning mop
- Self-emptying garbage can
- Obstacle avoidance with AI
- a feature for lifting mops and a carpet sensor
- Dock effectively cleans mops.
- Featuring automatic recharge and return technology, the battery lasts for three hours.
- Broad base
- No hot air drying of the mop
- Vast dock
- Liquid cannot be picked up by the mopping feature.
- Model S7 MaxV Ultra Dimensions: 13.8″ x 3.8″ x 10.5 lbs.
- All Floor Type (indoor)
- 5200 mAh of battery power
- Power of Suction 5100 Pa
- 180 minute Run Time (quiet)
- 400 litres for the dust bin, 200 ml for the water tank, and a 6-hour charge time.
- 53 dB noise level (balanced)
- Spot cleaning is available, as is zone cleaning and room cleaning.
- Yeah, digital mapping
- One year’s warranty
Roborock S7 MaxV Ultra bagless price
What is the Roborock S7 MaxV Ultra bagless price? Pre-orders for the Roborock S7 MaxV Ultra, which costs $1,399 and comes with the automated Empty Wash Fill Dock, opened in May 2022. This pier has two water tanks for clean and filthy water as well as a self-emptying trash can. The dock will automatically remove the contaminated water and reload the robot’s on-board water tank with clean water. Without a doubt, this is the model with everything.
Roborock S7 MaxV Ultra bagless price Comparison
|MaxV Ultra||MaxV Plus||MaxV|
|Dock||Ultra Clean Base||Standard Clean Base||Basic Charger|
|Empties Dust Bin||Yes||Yes||No|
|Suction||5,100 Pa||5,100 Pa||5,100 Pa|
|Battery||5,200 mAh||5,200 mAh||5,200 mAh|
|Run Time||180 mins||180 mins||180 mins|
Roborock S7 MaxV Ultra bagless review
Roborock S7 MaxV Ultra Build & design
A stylish robot, the Roborock S7 MaxV Ultra is covered in matte black with red accents on the corners. It is 13.89 x 13.77 x 3.8 inches in size. taller than some commercial robot vacuums, such the Eufy RoboVac G20. It has a LiDAR sensor on the top, an RGB camera, and a light for nighttime navigation. Roborock recognises and avoids things using this hardware in conjunction with their ReactiveAI. The dock is 19.4 inches by 16.5 inches in size. The iRobot Roomba j7+ dock, by contrast, has a footprint that is 15.5 inches by 12.25 inches.
- Vacuuming robot S7 MaxV
- Mop cloth and attachment for VibraRise
- Wash Fill dock is empty.
- Wash Fill dock base is empty.
- Wash Fill dock power cord is empty.
- Additional trash bags
- ordinary charging station
- Moisture-resistant mat
- Common power cable for charging docks
- user guide
The Roomba has two revolving beater brushes with a more aggressive pattern compared to the S7 MaxV’s single rotating beater brush. A tri-spoke side brush with rubber bristles and a rubber brush roll are located on the underside of the Roborock S7 MaxV Ultra. The mopping features of the bot are made possible by a microfiber mopping pad and plastic plate that snap onto the bot’s lower half.
Both a 13.4 oz. dust canister and a 6.7 oz. water tank are included. In the back of the robot is the water tank that supplies water to the pad. The inclusion of the Empty Wash Fill dock allows it to fill up, vacuum and mop, and prepare for its upcoming cleaning appointment. Although clean water is utilised to rinse the pad and top off the robot’s internal water tank, dirty water from the cleaning process is removed and sucked into the dirty water bin. The robot exits the dock, spins around 180 degrees, and docks itself for charging and dust removal after the pad has been rinsed at the conclusion of a cleaning run. It’s pretty clever.
Roborock S7 MaxV Ultra Suction power
With a maximum suction of 5,100 pascals (Pa), it provides more than twice the pickup power of the Roborock S7+ ($949.98). The S7 MaxV Ultra has three mopping scrub intensities, three cleaning modes, and five levels of suction while vacuuming (mop, vacuum, or vac and mop). Although the more powerful settings were needed to give carpets a deeper clean, the vacuum was able to pick up the bulk of the fine dust and bigger debris we dispersed over the floor on carpet. The ability of the robovac to automatically increase the suction level when carpet is detected is another feature that struck us. During testing, this feature increased the suction level from level one, called Silent, to maximum or Max +.
Roborock S7 MaxV Ultra bagless Cleaning review
The vacuum can be turned on and off, a cleaning cycle can be initiated, and there is even an indicator light on the power button that displays the vacuum’s current battery level. Pressing the spot clean button will cause the Roborock S7 MaxV to clean a 4.9″ x 4.9″ area in a single pass. When cleaning carpet, Roborocks ReactiveAI may pull up the mop and identify objects to avoid, locate designated areas and change settings.
The vibrating mop did an admirable job of eliminating filth, dust, and paw prints on our tile and hardwood floors in a single pass. Roborock’s $16 cleaning solution can be added to plain water or used in place of it, but we found no difference in the cleaning effectiveness after the upgrade. In either case, the floors were clear and streak-free and dried quickly. The S7 MaxV will return to the dock for charging, self-emptying, cleaning the mop cloth, and water tank replenishing when you press the final button, which is the dock button.
For the S7 MaxV Ultra, Roborock used its VibraRise mopping, which accomplishes two things: In order to provide the microfiber pad a proper scrubbing motion, the mopping plate is first audibly vibrated. When carpet is identified, the mopping plate is then physically raised by 5 millimetres. The fact that it actually works is the finest part. I was impressed when Roborock originally debuted this feature on the original S7.
A three-bedroom, two-story house can be completely cleaned with enough battery life. Since this is in Silent mode, the battery may go up to 180 minutes without a charge. We discovered that the S7 MaxV’s battery life, when operated at full power, was 75 minutes. At a battery level of 19%, the robot vacuum then returned to the base station to charge itself.
While operating, the S7 MaxV should be between 52 and 57 dB in volume. There is a noticeable increase in noise while utilising the Empty Wash Fill dock. While operating at the S7 MaxV’s lowest suction setting, it is pleasantly quiet. When cleaning hard surfaces, our decibel metre registered 55 dB, increasing to 63 dB on Max+, and a slightly higher reading of 68 dB when cleaning carpet. This is comparable to the sound of a running shower.
There are many options for vacuuming, mopping, or performing both at once via the Roborock app. It provides no-go zones in addition to zone- and room-specific cleaning. Three scrub modes and four suction modes are available, and each mode may be adjusted for a specific environment.
With the help of the Roborock app, you can pan around your home’s floor plan with the same simplicity as using Google Maps thanks to the combination of all those sensor data points. Not just barriers are being discussed. It labels rooms, distinguishes between carpet, tile, and hardwood, and even recognises furniture like sofas and TV stands. Even though it made the mistake of thinking my clawfoot tub was a bed, it is still really impressive and you can easily fix the small errors it makes in the app.
Tap the + sign in the top-left corner of the Google Home app, select Set Up Device > Works With Google, type in “Roborock,” and then sign in to pair it with Google Assistant. You only need to look for and enable the Roborock Plus skill in the Alexa app to connect it to Amazon’s virtual assistant.
Roborock S7 MaxV Ultra bagless Setup
You must carry out these actions in order to set up the Empty Wash Fill dock. Foam wrapping should first be removed from the dock. Next, secure the base. Plug the device in and attach the power now. The dust bin can then be removed by opening the flap on the S7 MaxV. The dust bin should be replaced after removing a plate covering the air inlet. Simply fill up the S7’s internal water tank, attach the VibraRise cloth attachment, and utilise the mopping feature.
Roborock S7 MaxV Ultra bagless Alternative
All of our coffee and syrup spills were cleaned up by the ECOVACS Deebot N8 Pro+ with very little residue left behind. Although this vacuum-mop combination has various capabilities that allow for hands-free cleaning, The Deebot N8 Pro+’s exceptional mopping skills allowed it to expertly navigate and manoeuvre around our furniture obstacle course of couches and tables while being careful to thoroughly survey the room’s perimeters before starting its clean. Your baseboards and furnishings are protected from unneeded robot mop bumps and collisions thanks to this kind of clever technology.
Also, when in vacuum mode, this device self-empties. It also smart maps your environment and includes obstacle avoidance technology. Although it successfully avoided a sock in our lab testing, it sucked up the USB cord, indicating that it probably won’t do so in the real world. As most robot appliances with obstacle avoidance don’t detect wires, we don’t see this as a major drawback. Despite not bothering our lab tester, the noise level of this robot vacuum and mop was really loud when emptying, so you probably wouldn’t want to operate it while a youngster was resting.